Serim® GUARDIAN™ Residual Chlorine Test Strips give a semi-quantitative indication that the chlorine bleach solution has been adequately rinsed from the hemodialysis machine, bicarb jugs, bicarb mixing tanks or water delivery systems following disinfection.
Serim® GUARDIAN™ Residual Peroxide Test Strips give a semi-quantitative indication that the peracetic acid/peroxide disinfectant concentration has been reduced to safe levels after rinsing the dialyzer, dialysis machine or water distribution system.
Serim Residual Formaldehyde Test Strips give a semi-quantitative indication of the concentration of formaldehyde remaining after rinsing formaldehyde disinfectant from dialyzers, dialysis delivery machines, water systems or portable reverse osmosis (RO) machines.
Serim® GUARDIAN™ Peracetic Acid Test Strips indicate the "potency" or concentration of peracetic acid present in peracetic acid/hydrogen peroxide-based disinfectants used to disinfect dialyzers.
Serim® Monitor™ for Chlorine (100-750 ppm) strips measure free chlorine. The test gives a semi-quantitative indication that diluted bleach (sodium hypochlorite) solutions have the appropriate concentration of free chlorine required for disinfecting hard, non-porous surfaces.
Serim® GUARDIAN™ HiSENSE Test Strips give a simple Positive/Negative indication for the presence or absence of total chlorine in treated water used to prepare dialysate. Serim Guardian HiSENSE Test Strips have a sensitivity of less than 0.1ppm total chlorine.
Serim® GUARDIAN™ HiSENSE ULTRA 0.1™ detects the total chlorine concentration (free chlorine and/or chloramine) in feed water used to prepare dialysate. The test can also be used to detect residual chlorine bleach in the solution used to rinse dialysate lines following disinfection of hemodialysis machines.
Serim® GUARDIAN™ Bicarb pH II™ Test Strips are designed to indicate the pH of the bicarbonate concentrates or final dialysate solution (a mixture of acid concentrate, bicarbonate concentrate and water).
Serim® GUARDIAN™ Blood Leak Test Strips give a qualitative indication of the presence of blood in dialysate to assist in differentiating an actual blood leak from a false alarm.
Serim® GUARDIAN™ Water Hardness Test Strips give a semi-quantitative indication of the level of hardness in water. Hardness is used to describe the total concentration of calcium and magnesium ions, expressed as ppm (or grains per gallon) of calcium carbonate, CaCO3.
Serim® pH 0 -14 Test Strips give a semi-quantitative measurement of the acidity or concentration of hydrogen ion H+ present in an aqueous solution.